97 products
97 products
1/4 Zip Polo Shirt
TTM-POL-018-BS
Regular price $48.00 Save $-48.00/
5.75 oz, 96% moisture-wicking polyester/4% spandex
Fabric doesn't snag
Wrinkle resistant
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
American Pride T-Shirt
TTM-SST-041-BS
Regular price $20.00 Save $-20.00/
100% pre-shrunk cotton
Unisex
Union-made & Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Antique Brass Finish IBT Logo Lapel Pin 2.0
TTP-PIN-012
Regular price $4.00 Save $-4.00/
Size: 1'' (H)
Antique brass finish with color fill
Union-made by Teamsters
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Arciform Teamster Beanie
TTH-BEA-007-B
Regular price $15.00 Save $-15.00/
100% acrylic
One size
Union-made
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Bamboo Polo Shirt
TTM-POL-024-STS
Regular price $50.00 Save $-50.00/
4.7 oz, 46% Bamboo Charcoal Viscose 54% Polyester Mesh
Bamboo is naturally dry wicking and antibacterial
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
Bamboo is naturally dry wicking and antibacterial
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Black Lives Matter T-Shirt
TTM-SST-039-BS
Regular price $20.00 Save $-20.00/
100% pre-shrunk cotton
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Body Mapping Polo Shirt
TTM-POL-021-RS
Regular price $48.00 Save $-48.00/
5.1 oz, 100% Dry Wicking Poly
Mapping design on shoulders and back
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Bulova Blue Dial St Steel Watch
TTP-MWA-006
Regular price $225.00 Save $-225.00/
Stainless steel bracelet
Domed crystal
Blue bi-level sunray dial
Double-press fold-over clasp
Diameter: 43.0 mm
Case thickness: 10.9 mm
Water-resistant to 50 meters
Union-assembled and Union-printed
Engraving included on the back!
Please add your name or Local number in the options below.
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Cannabis Workers Lapel Pin
TTP-PIN-010
Regular price $4.00 Save $-4.00/
Antique gold finish with color fill
Size: 1,25'' (H)
Union-made by Teamsters
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Cannabis Workers T-Shirt
TTM-SST-035-NAS
Regular price $20.00 Save $-20.00/
100% certified organic cotton
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | |
| CHEST | 18 | 20 | 22 | 24 | 26 | 28 |
| LENGTH | 27.5 | 28.5 | 29.5 | 30.5 | 31.5 | 32.5 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Cannabis Workers T-Shirt 2.0
TTM-SST-043-BS
Regular price $20.00 Save $-20.00/
100% certified organic cotton
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | |
| CHEST | 18 | 20 | 22 | 24 | 26 | 28 |
| LENGTH | 27.5 | 28.5 | 29.5 | 30.5 | 31.5 | 32.5 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Caravelle New York (by Bulova) Grey Sun-Ray Dial Watch
TTP-MWA-018
Regular price $150.00 Save $-150.00/
Sleek and streamlined in stainless steel with gunmetal finish, gold-finish crown, grey sunray dial, luminous hands, and date feature
Double-press fold-over clasp
Diameter: 41 mm
Case Thickness: 9 mm
Water-resistant to 30 meters
Union-assembled and Union-printed
Engraving included on the back!
Please add your name or Local number in the options below.
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Classic Polo Shirt
TTM-POL-015-BS
Regular price $45.00 Save $-45.00/
5.75 oz., 96% dry wicking polyester/4% spandex
No-curl collar/snag-resistant fabric
Colors won't fade or shrink if laundered properly
Wrinkle resistant
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Denim Jacket
TTM-JAC-001-DS
Regular price $75.00 Save $-75.00/
Teamsters logo embossed on back
Union-made in the USA
Please note: This jacket is made rather small. We recommend ordering 1 size up.
| S | M | L | XL | 2XL | 3XL | 4XL | |
| CHEST | 34-36 | 38-42 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Double Suede Jersey Polo Shirt
TTM-POL-022-CS
Regular price $48.00 Save $-48.00/
5.4 oz, 94/6 Dry Wicking Poly/Spandex
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Drop Needle Check Polo Shirt
TTM-POL-020-BS
Regular price $45.00 Save $-45.00/
4.75 oz, 92% polyester/4% spandex
Made in U.S.A. and union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Eagle T-Shirt
TTM-SST-028-BS
Regular price $25.00 Save $-25.00/
100% pre-shrunk cotton
Unisex
Union-made & Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Embossed Polo Shirt
TTM-POL-014-NS
Regular price $45.00 Save $-45.00/
5.75 oz, 96% moisture-wicking polyester/4% spandex
Fabric doesn't snag
Wrinkle resistant
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Embroidered Cannabis Patch 4'' (H)
TTP-PAT-003
Regular price $10.00 Save $-10.00/
Iron-on embroidered patch
Union-made
3" (W)
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Embroidered Patch 3'' (H)
TTP-PAT-001-B/W/G
Regular price $5.00 Save $-5.00/
Iron-on embroidered patch
Union-made
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.