45 products
45 products
Teamsters Union Strong T-shirt
TTM-SST-045-BS
Regular price $25.00 Save $-25.00/
100% pre-shrunk cotton
High-quality heavyweight fabric
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Men's Chambray 1/4 Zip Windshirt
TTM-JAC-021 - HCS
Regular price $70.00 Save $-70.00/
4.2 oz, 92/8 Poly Spandex
Sizes: S-4XL
Four way stretch fabric
Water repellent and wind resistant
Stylish, comfortable, and casual
Wrinkle and stain resistant
Made in USA and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Men's Chambray S/S Dress Shirt
TTM-POL-029 - HBS
Regular price $70.00 Save $-70.00/
Chambray fabric
4.2 oz, 92% polyester/8% spandex
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Men's 3 Layers Soft Shell Full Zip Jacket
TTM-JAC-022 - NS
Regular price $130.00 Save $-130.00/
9 oz, 91/9 Polyester/Spandex
Sizes: S-4XL
3 layers bonded soft shell
Water repellent and wind resistant
Breathable, soft and warm inside
Stretchable, durable for easy movement
2 side pockets and 2 hidden pockets
Made In USA and Union Embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Men's 3 Layers Soft Shell Full Zip Vest
TTM-JAC-023 - BS
Regular price $115.00 Save $-115.00/
9 oz, 91/9 Polyester/Spandex
Sizes: S-4XL
3 layers bonded soft shell
Water repellent and wind resistant
Breathable, soft and warm inside
Stretchable, durable for easy movement
2 side pockets and 2 hidden pockets
Made In USA and Union Embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Teamsters Fuel Marathon's Profits T-shirt
TTM-SST-044-RS
Regular price $20.00 Save $-20.00/
50% Combed Ring Spun Cotton 50% Polyester 4.4 oz/sq yd
Unisex
Made in USA & Union-printed
| S | M | L | XL | 2XL | 3XL | |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 |
| WAIST | 28-30 | 32-34 | 36-38 | 40-42 | 44-46 | 46-48 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Long sleeved Rugby Polo Shirt
TTM-POL-025-YS
Regular price $80.00 Save $-35.00/
12 oz knit Cotton
Made in Canada and Union-Embroidered
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Ottoman Polo Shirt
TTM-POL-023-ABS
Regular price $50.00 Save $-50.00/
5.0 oz, 100% Dry Wicking Poly
Ottoman tipping on the collar
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
Ottoman tipping on the collar
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Bamboo Polo Shirt
TTM-POL-024-STS
Regular price $50.00 Save $-50.00/
4.7 oz, 46% Bamboo Charcoal Viscose 54% Polyester Mesh
Bamboo is naturally dry wicking and antibacterial
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
Bamboo is naturally dry wicking and antibacterial
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Cannabis Workers T-Shirt 2.0
TTM-SST-043-BS
Regular price $20.00 Save $-20.00/
100% certified organic cotton
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | |
| CHEST | 18 | 20 | 22 | 24 | 26 | 28 |
| LENGTH | 27.5 | 28.5 | 29.5 | 30.5 | 31.5 | 32.5 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Double Suede Jersey Polo Shirt
TTM-POL-022-CS
Regular price $48.00 Save $-48.00/
5.4 oz, 94/6 Dry Wicking Poly/Spandex
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Body Mapping Polo Shirt
TTM-POL-021-RL
Regular price $48.00 Save $-48.00/
5.1 oz, 100% Dry Wicking Poly
Mapping design on shoulders and back
Perfect for golf or warm weather activities
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Unisex Teamsters Tie Dye Sweatshirt
TTW-SWE-002-CLS
Regular price $48.00 Save $-48.00/
50% Combed Ring Spun Cotton 50% Polyester
Soft and extremely comfortable fleece
Made in the USA and Union-printed
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
PRIDE T-Shirt
TTM-SST-042-ROS
Regular price $25.00 Save $-25.00/
100% pre-shrunk cotton
Unisex
Made in USA & Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
IBT Logo Brown Long Sleeve T-Shirt
TTM-LST-002-BRS
Regular price $22.00 Save $-22.00/
100% Combed Ring Spun Cotton
Unisex
USA-made and Union-printed
| S | M | L | XL | 2XL | 3XL | |
| CHEST | 18 | 20 | 22 | 24 | 26 | 28 |
| WAIST | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Polyester Full Zip Hooded Jacket
TTM-JAC-019-BS
Regular price $70.00 Save $-70.00/
6.25 oz, 100% polyester
Provides warmth without weight
Soft and comfortable
Water repellent
Made in U.S.A. and union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Polyester Full Zip Jacket
TTM-JAC-018-NS
Regular price $70.00 Save $-70.00/
6.25 oz, 100% polyester
Provides warmth without weight
Soft and comfortable
Water repellent
Made in U.S.A. and Union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
Drop Needle Check Polo Shirt
TTM-POL-020-BS
Regular price $45.00 Save $-45.00/
4.75 oz, 92% polyester/4% spandex
Made in U.S.A. and union-embroidered
| S | M | L | XL | 2XL | 3XL | 4XL | |
| NECK | 14-15 | 15-16 | 16-17 | 17-18 | 18-19 | 19-20 | 21 |
| CHEST | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
IBT Logo Long Sleeve T-Shirt
TTM-LST-001-NS
Regular price $22.00 Save $-22.00/
100% pre-shrunk cotton
Unisex
Union-made and Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
American Pride T-Shirt
TTM-SST-041-BS
Regular price $20.00 Save $-20.00/
100% pre-shrunk cotton
Unisex
Union-made & Union-printed
| S | M | L | XL | 2XL | 3XL | 4XL | |
| WIDTH | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| LENGTH | 26 | 28 | 29 | 30 | 31 | 32 | 33 |
A minimum quantity is required to personalize the products for your local. For volume pricing and custom-made product information, please contact us.
1. Preheat your iron to 350 degrees Fahrenheit (the cotton setting for about five minutes or until hot) and position your patch where you want it on the material
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.
2. Place a pressing parchment square or a thin cloth over the patch. EPC TIP: Use a damp cloth when ironing wool or other delicate fabrics. Also, make sure the cloth is damp, not soaking wet.
3. Place your iron onto the cloth on top of the patch and apply firm pressure for about 30 seconds. Allow material and patch to cool for five minutes.
4. Next, turn your garment inside out and iron the area behind the patch while applying firm pressure for 30 seconds. This ensures that the patch is firmly attached. Allow the area to cool for another five minutes, and the iron-on process is complete.